Questions?
(800) 621-5381
Edging for Pavers: Metal Paver Edge Restraints Explained | Longview Supply
Edging for Pavers: Metal Paver Edge Restraints Explained
Why pavers need edging and which metal restraint to choose
In This Guide
Edging for pavers is a restraint installed along the perimeter of a paved area to lock the pavers in place and stop them from shifting, spreading, or sinking over time. Metal edging for pavers, particularly aluminum, is favored for its strength and low profile: it holds the pavers firmly while nearly disappearing below the surface. Permaloc makes several aluminum paver edging profiles for exactly this job.
Quick answer: Edging for pavers is a perimeter restraint that locks pavers in place. Aluminum (metal) paver edging holds firmly with a low profile that hides below the surface.
Permaloc PermaStrip aluminum paver edging restraint.
Why pavers need edging
Pavers are only as stable as their edges. Without a restraint, the outer pavers gradually creep outward under traffic and freeze-thaw, the joints open, sand washes out, and the field loosens. Edging for pavers holds that perimeter so the whole installation stays tight and level.
Why metal edging for pavers
- Strength: aluminum holds the perimeter firmly against lateral movement.
- Low profile: paver restraints sit below the surface, hidden once backfilled.
- Durability: aluminum will not rust or break down like steel or plastic restraints.
- Clean result: it keeps paver edges straight and joints tight for the life of the hardscape.
Permaloc StructurEdge low-profile paver restraint.
Permaloc paver edging options
- PermaStrip: a paver and hardscape restraint in 3.5 to 6 inch depths for solid anchoring.
- StructurEdge: a low-profile restraint (1-5/8 to 2-1/4 inch) that hides below the pavers.
- Heavier landscape lines can also restrain pavers where additional height is wanted.
How paver edging installs
Paver restraints are placed against the outer edge of the laid pavers on the compacted base, then spiked through the flange into the base with stakes. The restraint sits just below the paver surface, so it is invisible once the edge is backfilled with soil or sand. Proper staking at the recommended spacing is what keeps the edge from moving.
Not sure which product fits your site? Use the Permaloc Aluminum Edging Selector, our free interactive tool under the Resources menu, to answer a few plain-language questions and get matched to the right Permaloc edging line, gauge, depth, and finish for your project.
Shop Paver Edging at Longview Supply
Permaloc aluminum paver restraints, with free shipping on all orders.
Shop Permaloc Aluminum Edging Use the Edging SelectorFrequently Asked Questions
What is edging for pavers?
Edging for pavers is a restraint installed along the perimeter of a paved area to lock the pavers in place and stop them from shifting, spreading, or sinking. Aluminum paver edging holds firmly while sitting low enough to hide below the surface.
Why do pavers need edge restraint?
Without a restraint, the outer pavers creep outward under traffic and freeze-thaw, joints open, sand washes out, and the field loosens. Edging holds the perimeter so the installation stays tight and level.
Why use metal edging for pavers?
Metal, especially aluminum, holds the perimeter firmly against lateral movement, sits low and hidden below the surface, and will not rust or break down like steel or plastic restraints, keeping edges straight and joints tight.
Which Permaloc product is best for pavers?
PermaStrip is a paver and hardscape restraint in 3.5 to 6 inch depths, and StructurEdge is a low-profile restraint (1-5/8 to 2-1/4 inch) that hides below the pavers. The choice depends on how much depth and height you need.
How is paver edging installed?
It is placed against the outer edge of the laid pavers on the compacted base, then spiked through the flange into the base with stakes. It sits just below the paver surface and is hidden once backfilled.
